Tim Nolte

Also, there is no "do at your own risk". I calibrate every filament brand/type/color in order to get the best results. Simply running the same exact filament preset for even 2 different colors is not always best. In addition doing TPU on top of say PETG is a perfectly valid 3D printing thing to do.

Yes, I have a Centuari Carbon. What firmware release are you on? I have rolled my machine back to the .25 release.

This isn't 100% true. The gcode command in OrcaSlicer did Pause and Change Filament are both an M600 gcode command, and it doesn't work on my machine when I just tried it.

There is also a big difference between what OrcaSlicer generates for gcode between just a Pause and an actual Change Filament where you select additional filaments. The resulting gcode actually has the proper filament settings for the different filament. If you just add a pause the resulting gcode will just use the same exact filament settings for the print as it used to start. If you are printing 2 different filaments like TPU on top of PETG a simple Pause is not adequate.

Not having read through all of the comments, to confirm if this has been pointed out, but I think the biggest problem here is that I see that `wpcode_snippets` was mentioned, which means that the WPCode plugin was installed. IMO this should never be installed on WordPress sites for exactly this sort of reason. That plugin is essentially designed to inject code and bypass most of the sanitization checks present in WordPress.

https://discord.gg/7NKnYdde