Note: GitHub-hosted runners are not currently supported on GitHub Enterprise Server. You can see more information about planned future support on the GitHub public roadmap.
Introduction
This guide shows you how to create a continuous integration (CI) workflow that builds and tests a Ruby application. If your CI tests pass, you may want to deploy your code or publish a gem.
Prerequisites
We recommend that you have a basic understanding of Ruby, YAML, workflow configuration options, and how to create a workflow file. For more information, see:
Using the Ruby starter workflow
GitHub provides a Ruby starter workflow that will work for most Ruby projects. For more information, see the Ruby starter workflow.
To get started quickly, add the starter workflow to the .github/workflows directory of your repository. The workflow shown below assumes that the default branch for your repository is main.
# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.
name: Ruby
on:
push:
branches: [ main ]
pull_request:
branches: [ main ]
jobs:
test:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- name: Set up Ruby
uses: ruby/setup-ruby@359bebbc29cbe6c87da6bc9ea3bc930432750108
with:
ruby-version: '3.1'
- name: Install dependencies
run: bundle install
- name: Run tests
run: bundle exec rake
Specifying the Ruby version
The easiest way to specify a Ruby version is by using the ruby/setup-ruby action provided by the Ruby organization on GitHub. The action adds any supported Ruby version to PATH for each job run in a workflow. For more information and available Ruby versions, see ruby/setup-ruby.
Using Ruby's ruby/setup-ruby action is the recommended way of using Ruby with GitHub Actions because it ensures consistent behavior across different runners and different versions of Ruby.
The setup-ruby action takes a Ruby version as an input and configures that version on the runner.
steps:
- uses: actions/checkout@v2
- uses: ruby/setup-ruby@359bebbc29cbe6c87da6bc9ea3bc930432750108
with:
ruby-version: '3.1' # Not needed with a .ruby-version file
- run: bundle install
- run: bundle exec rake
Alternatively, you can check a .ruby-version file into the root of your repository and setup-ruby will use the version defined in that file.
Testing with multiple versions of Ruby
You can add a matrix strategy to run your workflow with more than one version of Ruby. For example, you can test your code against the latest patch releases of versions 3.1, 3.0, and 2.7.
strategy:
matrix:
ruby-version: ['3.1', '3.0', '2.7']
Each version of Ruby specified in the ruby-version array creates a job that runs the same steps. The ${{ matrix.ruby-version }} context is used to access the current job's version. For more information about matrix strategies and contexts, see "Workflow syntax for GitHub Actions" and "Contexts."
The full updated workflow with a matrix strategy could look like this:
# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.
name: Ruby CI
on:
push:
branches: [ main ]
pull_request:
branches: [ main ]
jobs:
test:
runs-on: ubuntu-latest
strategy:
matrix:
ruby-version: ['3.1', '3.0', '2.7']
steps:
- uses: actions/checkout@v2
- name: Set up Ruby ${{ matrix.ruby-version }}
uses: ruby/setup-ruby@359bebbc29cbe6c87da6bc9ea3bc930432750108
with:
ruby-version: ${{ matrix.ruby-version }}
- name: Install dependencies
run: bundle install
- name: Run tests
run: bundle exec rake
Installing dependencies with Bundler
The setup-ruby action will automatically install bundler for you. The version is determined by your gemfile.lock file. If no version is present in your lockfile, then the latest compatible version will be installed.
steps:
- uses: actions/checkout@v2
- uses: ruby/setup-ruby@359bebbc29cbe6c87da6bc9ea3bc930432750108
with:
ruby-version: '3.1'
- run: bundle install
Caching dependencies
If you are using GitHub-hosted runners, the setup-ruby actions provides a method to automatically handle the caching of your gems between runs.
To enable caching, set the following.
steps:
- uses: ruby/setup-ruby@359bebbc29cbe6c87da6bc9ea3bc930432750108
with:
bundler-cache: true
This will configure bundler to install your gems to vendor/cache. For each successful run of your workflow, this folder will be cached by Actions and re-downloaded for subsequent workflow runs. A hash of your gemfile.lock and the Ruby version are used as the cache key. If you install any new gems, or change a version, the cache will be invalidated and bundler will do a fresh install.
Caching without setup-ruby
For greater control over caching, if you are using GitHub-hosted runners, you can use the actions/cache Action directly. For more information, see "Caching dependencies to speed up workflows."
steps:
- uses: actions/cache@v2
with:
path: vendor/bundle
key: ${{ runner.os }}-gems-${{ hashFiles('**/Gemfile.lock') }}
restore-keys: |
${{ runner.os }}-gems-
- name: Bundle install
run: |
bundle config path vendor/bundle
bundle install --jobs 4 --retry 3
If you're using a matrix build, you will want to include the matrix variables in your cache key. For example, if you have a matrix strategy for different ruby versions (matrix.ruby-version) and different operating systems (matrix.os), your workflow steps might look like this:
steps:
- uses: actions/cache@v2
with:
path: vendor/bundle
key: bundle-use-ruby-${{ matrix.os }}-${{ matrix.ruby-version }}-${{ hashFiles('**/Gemfile.lock') }}
restore-keys: |
bundle-use-ruby-${{ matrix.os }}-${{ matrix.ruby-version }}-
- name: Bundle install
run: |
bundle config path vendor/bundle
bundle install --jobs 4 --retry 3
Matrix testing your code
The following example matrix tests all stable releases and head versions of MRI, JRuby and TruffleRuby on Ubuntu and macOS.
# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.
name: Matrix Testing
on:
push:
branches: [ main ]
pull_request:
branches: [ main ]
jobs:
test:
runs-on: ${{ matrix.os }}-latest
strategy:
fail-fast: false
matrix:
os: [ubuntu, macos]
ruby: [2.5, 2.6, 2.7, head, debug, jruby, jruby-head, truffleruby, truffleruby-head]
continue-on-error: ${{ endsWith(matrix.ruby, 'head') || matrix.ruby == 'debug' }}
steps:
- uses: actions/checkout@v2
- uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
with:
ruby-version: ${{ matrix.ruby }}
- run: bundle install
- run: bundle exec rake
Linting your code
The following example installs rubocop and uses it to lint all files. For more information, see RuboCop. You can configure Rubocop to decide on the specific linting rules.
# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.
name: Linting
on: [push]
jobs:
test:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
with:
ruby-version: 2.6
- run: bundle install
- name: Rubocop
run: rubocop
Publishing Gems
You can configure your workflow to publish your Ruby package to any package registry you'd like when your CI tests pass.
You can store any access tokens or credentials needed to publish your package using repository secrets. The following example creates and publishes a package to GitHub Package Registry and RubyGems.
# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.
name: Ruby Gem
on:
# Manually publish
workflow_dispatch:
# Alternatively, publish whenever changes are merged to the `main` branch.
push:
branches: [ main ]
pull_request:
branches: [ main ]
jobs:
build:
name: Build + Publish
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- name: Set up Ruby 2.6
uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
with:
ruby-version: 2.6
- run: bundle install
- name: Publish to GPR
run: |
mkdir -p $HOME/.gem
touch $HOME/.gem/credentials
chmod 0600 $HOME/.gem/credentials
printf -- "---\n:github: ${GEM_HOST_API_KEY}\n" > $HOME/.gem/credentials
gem build *.gemspec
gem push --KEY github --host https://rubygems.pkg.github.com/${OWNER} *.gem
env:
GEM_HOST_API_KEY: "Bearer ${{secrets.GITHUB_TOKEN}}"
OWNER: ${{ github.repository_owner }}
- name: Publish to RubyGems
run: |
mkdir -p $HOME/.gem
touch $HOME/.gem/credentials
chmod 0600 $HOME/.gem/credentials
printf -- "---\n:rubygems_api_key: ${GEM_HOST_API_KEY}\n" > $HOME/.gem/credentials
gem build *.gemspec
gem push *.gem
env:
GEM_HOST_API_KEY: "${{secrets.RUBYGEMS_AUTH_TOKEN}}"
